Electrical Thermal Fluid Heater Details of Electrical Thermal Fluid Heater Thermal fluid heatercould reach high temperature under low pressure, heat up steadily and adjust temperatu
Heat Energy Centre Details of the Heat Energy Center Itmainly consists of the front fuel adding equipment, the waste material, wood powder, waste oil and gas burning sy
Coal Fuel Industrial Boiler Specifications of Coal fuel industrial boiler 1) Economic design with high efficiency and low energy consumption. 2) Structure does not damage heat c
Horizontal Oil Boiler Specification of Horizontal Oil Boiler 1. Rated power is from 150,000kcal to 12,000,000kcal. 2. Designpressureis1.0Mpafrom180kwto4600kwwhiletheothers
Biphenyl boiler Specification of Biphenyl boiler 1. High heat efficiency. 2. Safe and fluency running. 3. Power: 1900-14000Kw/h. 4. Horizontal and vertical. 5. Reaso
Molten salt boiler Specification of Molten Salt Boiler 1. Working pressure: 1.0-1.5Mpa. 2. Working temperature: 350°C. 3. Thermal efficiency: >75%. 4. High heat
Steam Generator Details of Steam Generator: The steam generator is the heating furnace heat exchange device, it produces the saturated steam under a certain of tempe
hot blast boiler Specification of Hot Blast Boiler Thermal power:50000-10000000 kcal/h Efficiency:≥ 80% or ≥ 95%. Temperature: ≤ 350 °C or ≤ 650 °
Exhausted-heat boiler Details of Exhaust-heat boiler High efficiency of waste hear. Vertical and horizontal type are available. We can do according to client's requirement
Mobile Heating Boiler Details Of Mobile Heating Boiler: 1. Rated power: 180-14000kw/h. 2. Working preesure: 1.0Mpa. 3. Working temperature: 350°C. 4. Thermal efficienc
Horizontal Coal-fired Boiler Details of the Coal-fired Boiler: 1. Rated power: 1.9-4.6MW. 2. Working pressure: 1.0Mpa. 3. Working temperature: 350°C. 4. Thermal effciency: &g
Hot-Medium Circulation Pump Specification of Hot-Medium Circulation Pump 1. The diesel engine pump's capacity from 2m³/h to 700m³/h. 2. Head from 20m to 80m. 3. Excell
Heat Transfer Fluid Specifications of heat transfer fluid: Apperance: yellowish & transparent. 1) Density at 20°C: 0.84 - 0.89g/cm³ 2) Kinematic viscosity a
Heat Transfer Fluid Specifications of heat transfer fluid: 1) Density at 20°C: 0.82 - 0.85 g/cm³. 2) Kinematic viscosity at 50°C: 19- 29 mm²/s. 3) Flas
Coal Fuel Industrial Boiler Specifications of Coal fuel industrial boiler 1) Economic design with high efficiency and low energy consumption 2) Structure does not damage heat ca
Oil/gas fired bolier Oil/gas fired boiler Specifications and the technical data as follows: 1. Economic dsign with high efficiency and low energy consumption. 2. Thermal
Hot Oil Pump Specification of Hot Oil Pump The WRY series of pumps was designed on the basis of all kinds of advanced oil pumps at home and abroad. It has reasona
Vertical Oil(Gas) Boiler Details of Vertical Oil/Gas Boiler 1. Rated power of this type boiler is from 0.12MW to 14MW. 2. Design pressure is 1.0Mpa. 3.Working temperature is
Thermal Fluid Heater Specification of the thermal fluid heater: 1. High efficiency and low energy consumption. 2. High temperature under low pressure. 3. Heat up steadily
Thermal Fluid Heating Boiler Thermal Fluid Heating Boiler The rated power of thermal fluid heateris 0.12Mw(10×104kcal/h) to 14Mw(1200×104kcal/h) Design pressure is 1.
ACC Autoclave Details of Autoclave Autoclave is a kind of large-scale steam equipment. It can be used to steam sand lime brick, flyash brick, slag brick, aerated c
Biomass Boiler Specification of Biogas boiler 1. It can apply various fuel with low calorific value and low density. 2. Since the biomass fuel is small in density &
Infrared Autoclave Details of Infrared Autoclave Glass autoclave isa kind of keyequipment, which isusedforglassdeep-processing.To achieve the safety demands of laminate
Thermal oil industrial boiler Application of thermal oil industrial boiler: Chemical: polymerization, condensation, distillation, concentration, evaporation, fusion Fat: decomposi
Organic Heating Boiler Details of Organic Heating Boiler 1. Fue: oil, gas and coal. 2. Type: vertical and horizontal. 3. Design preesure: 1.0Mpa. 4. Working temperature: 35
